ASTRO VG-871 - LGADR [F2 H]: Gateway IP Address Readout

Chapter 4 INDIVIDUAL FORMATS FOR CONTROL COMMANDS
415
4.66 LGADR [F2H]: Gateway IP address readout
Function: This command reads the IP address of the gateway. (In the VG-848 series,
even its setting is registered, it will not function.)
Sequence: Type 3
Parameters:
STX
1 byte
02H
LGADR
1 byte
F2H
ETX
1 byte
03H
Fig. 4-66-1
Data:
STX
1 byte
02H
TRDT
1 byte
10H
IP address
8 bytes
ASCII code (Hex)
Example: 192.168.0.10 → “C0A8000A”
ETX
1 byte
03H
Fig. 4-66-2