ASTRO VG-871 - Settings Established Using Window Pattern Clearing Command

476
6.4.3 Settings established using window pattern clearing command
Pattern data output ON/OFF setting: Command [28H 63H]
Setting item
Setting value
Binary
ASCII
STX
0×02
VGCMD4
0×FD
WINCLR4
0×28
“(“
0×63
“c”
ETX
0×03
Note) ACK or the error status is received from the VG generator here.
ACK is received if the data has been transferred successfully.
6.4.4 Settings established using character plane color setting command
Character plane color setting: Command [28H 2CH]
Setting item
Setting value
Binary
ASCII
STX
0×02
VG4CMD
0×FD
CHACOL4
0×28
“(“
0×2C
“, “
R
0×32
“2”
0×35
“5”
0×35
“5”
Delimiter
0×2C
“, “
G
0×30
“0”
Delimiter
0×2C
“, “
B
0×30
“0”
Delimiter
0×2C
“, “
Bit Mode
0×38
“8”
ETX
0×03
Note) ACK or the error status is received from the VG generator here.
ACK is received if the data has been transferred successfully.