2.172 LERR5 [24H 48H] : Error code aquisition
Function : this command obtains error code.
Sequence : Type 3
Command :
Fig 2.172-1
Command :
Fig 2.172-2
Note 1 : during group data is being executed, or current buffer RAM is being executed, when
command error “99” is returned, by using this command, the error code for each terminal can be
obtained. Referring to the list of error code, users can understand its details.
Note 2 : only error is returned to this command. If nothing returns, it means, “Success”, “no board”
or “no terminal”.
ACK or
STX+ESTS+Error Code+ETX
To Next Page
