Chapter 2 INDIVIDUAL FORMATS FOR VG CONTROL COMMANDS
2.44 PNAMER4 [20H 4BH]: Program name readout
Function: This command gets the name of the designated program number. When the
program number is 0, it reads out the data from the buffer RAM. When the
program has any number from 1001 to 2000, the command reads out the
data from the fixed data. When the program number is 9999, the command
reads the data from the command work RAM.
Sequence: Type 3
Command:
Fig. 2-44-1
Data:
* 20 ASCII characters (When the string contains
fewer than 20 characters, enter a space or spaces
after the characters to bring the number of
characters up to 20)
Fig. 2-44-2
To Next Page
