Ateis IDA8S User Manual

IDA8 Global-Net User Manual156
© 2020, ATEÏS. All rights reserved.
3.2.7 URGP16I16O
The URGP 16I16O is an extension unit for the IDA8-System, LAPG2T and ECS. The URGP16I16O
provides those systems with 32 additional alarm inputs and outputs. Each input is monitored and
can be programmed to trigger a digital audio message into a specific zone or group of zones. The
URGP is linked to the System units through a RS232 /RS485 monitored serial link.
3.2.7.1 Front Panel
Evacuation LED:
Light up in red when the Evacuation input is active or blinks while boot. The following table lists
the states of the Evac LED:
Status
Frequency
Activity
Continuous
One of the Evacuation inputs is active.
Blinking
° °
Blinks 5 times after powered on.
Fault LED:
Display fault status of system. The following table lists the states of the Fault LED:
Status
Frequency
Activity
Continuous
One of the the fault inputs is active.
One of the Evacuation inputs is Short Circuit or Line Open
Blinking
° °
Blinks 5 times after powered on.
Power LED:
Light up in green when the device is powered.
3.2.7.2 Rear Panel

Ateis IDA8S Specifications

General

Brand	Ateis
Model	IDA8S
Category	Security System
Language	English