IDA8 Global-Net User Manual260
© 2020, ATEÏS. All rights reserved.
Click [Add] to create a new event, and a pop-up setting
window will be displayed, here you can choose which
kinds of event users acquired. Select [Remote PSS AS
Jump Paging] option on [Type] drop-down box, then
press [OK].
Event Settings
Click [Content...] button on Event Manager window to open the settings window of event.
Page: Select the page which users intend to switch to.
5.4 Device Management
Device Management window helps to search the Ateis devices on network. Select the [Device
Management] tab or open it through the menu [View > Device Management].
Device Information:
Devices: List the Ateis devices.
If the Ateis Studio cannot find IDA8 devices, please see Ateis Studio Cannot Find Devices
troubleshooting for details.
Type: The type of the Ateis device such as ECS, IDA8C etc..
Serial Number: The serial number of Ateis device.
Identifier: Display the ID of Ateis Net as (X, Y), X indicates as the ID of global net and Y as
local net.
Redundancy: The redundancy address of the device.
Fault: Display the fault status of devices. If a fault is detected, this field will display [....]
button, click to open the Fault List window.
Connection: Display the status of Ateis device on Ethernet communication (Connect,
Disconnect and Block). If the Connection grid displays in [Block], click [Clear] button to
refresh the status again.
To Next Page
Loading...
Need help?
General
