Ateis IDA8S User Manual

System Configuration 273
© 2020, ATEÏS. All rights reserved.
Read: Refresh the setting.
Write: Save the setting.
5.4.7.5 VR Calibration
Allow to adjust the EVAC inputs (RAC source selector for example) of IDA8.
1. Select the channel
where the device is
connected to.
2. Set the rotary knob of RAC to the
first step of level knob, see the
picture below, then click [Minimum]
button to calibrate.
3. Set the rotary knob of RAC to the
last step of level knob, see the
picture below, then click [Maximum]
button to calibrate.
5.4.7.6 Fault Behave
Allow to choose either global or local system as the norm for the whole system.

Ateis IDA8S Specifications

General

Brand	Ateis
Model	IDA8S
Category	Security System
Language	English