Name: Ateis IDA8S
Brand: Ateis
Rating: 5 (1 reviews)

To Next Page

To Previous Page

IDA8 Global-Net User Manual534

10.2 Setup Audio Monitoring on Front Panel

Allow to monitor the audio input/output sources to each zone/channel over the device's front panel.

Step 1: Open the "Device DSP

Configuration" window. The example

here monitors Input A, channel

1,2,3,4 and Output B, channel

5,6,7,8.

Step 2: Right click Input A component

to open the [Properties] window, then

go to [Audio Out] and tick the boxes

for the monitoring channels (channel

1-4).

Step 3: Right click the Output B

component to open the [Properties]

window, then go to [Audio In] and tick

the boxes for the monitoring channels

(channel 5-8) to finish the setting.

Step 4: Go to the device front panel

and select [Audio Monitoring] button,

then select the desired channel and

press "ON" to play the audio source,

and press again to stop playing the

audio source.

Questions and Answers:

Need help?

Do you have a question about the Ateis IDA8S and is the answer not in the manual?

Ateis IDA8S Specifications

General