IDA8 Global-Net User Manual72
© 2020, ATEÏS. All rights reserved.
Name: The name of PPM AS object.
RS485 Target: Indicate the connector on audio
processor that PPM AS connected in the
design window.
Talk Mode: Specify the behavior of key pressing
for paging. There are two modes:
Push: Push and hold the key for paging
request, release the key to end paging.
Lock: First push for paging request, if request is
grant then start paging, push again to end
paging.
Key Count: Specify how many keys in PPM
AS.
Pre/Post-Announcement:
o Enable: Tick/Untick the checkbox to
enable/disable the pre/post-announcement
chime playing.
o Name: Display the name of the message.
Enable: Tick/Untick the checkbox to enable/
disable the post-announcement chime playing.
3.2.1.1.4.1 Settings
Double click the PPM AS object to open the window of PPM AS Settings.
Name: The name of PPM AS.
Talk Announcement: The settings window of announcement message.
o Pre/Post-position: Enable or disable pre/post-announcement chime playing. Click the [...] to
select the internal message file which stored in the audio processor.
The name of chime can not be more than 16 characters (including the characters of file
To Next Page
Loading...
Need help?
General
