System Products 83
© 2020, ATEÏS. All rights reserved.
Value: To specify which code on the paging event of integration is bound with the key.
All: Select all zones for the key.
Zone Selection: The grid lists all zones of network paging component for all the audio
processors. Tick the checkbox to select zones separately for the key.
3.2.1.2.4.2 Trigger/Control
The settings to link to the event key which is triggered by using the PSS-AS.
Event: Select the event linked to the key.
o Remote Wave File Listen: Trigger the message file which is stored in the IDA8 processor.
Please note this event requires to work with Remote Wave File Select event button.
o Remote Wave File Record: Record the message file by using the PSS-AS, and store the
file into the IDA8 proceesor. Please note this event requires to work with Remote Wave
File Select event button.
o Remote Wave File Delete: Delete the message file which is store in the IDA8 processor.
Please note this event requires to work with Remote Wave File Select event button.
o Remote Modbus Record-Push: Record the message file by using Modbus protocol to
send command and trigger the PSS-AS to record (push to talk).
o Remote Modbus Record-Lock: Record the message file by using Modbus protocol to send
command and trigger the PSS-AS to record (latching).
Control Mode: Specify the control mode is Trigger or Control, see Device Management >
Value Control , Value Trigger chapters for details.
State: Enter a value for the state that processed by event control procedure, each state
number result different adjustment of system, see Event Management for details.
Link: Open the settings window of event.
3.2.1.2.4.3 Message
Set the message file which will displayed PSS-AS. Before selecting, you need to build a chime
list which sets up on the Setting tab.
To Next Page
Loading...
Need help?
General
