Ateis IDA8S User Manual

System Products 29
© 2020, ATEÏS. All rights reserved.
Eth. Limit: The maximum number of IP that can be assigned over the network.
3.1.1.4 3rd Party Control
The following table lists the 3rd Party Control protocols supported by IDA8C.
Protocol
Interface
Function
Connection
Settings
Ateis 3rd Party
Protocol
Ethernet(UDP)
UDP Port = 19761
Read/Write value of parameters.
Stepped adjustment for parameters.
Telephone card function
Modbus
Ethernet(TCP)
PDC(RS485)
TCP Port = 502
PDC Port 1~ 4
Level control
Paging
Read Monitoring Status
Read Evacuation Status
Play Message
Logic I/O Control
3.1.1.5 LCD Menu
3.1.1.5.1 System Information
Read the status information of the local IDA8C or all master/slave units in the IDA8 system.
EVAC List:
The master unit would be (n, 1), and slave
units will be in sequence (n ,2), ID (n ,3).
Fault List:
Display the fault list, to know about more fault
information, see Monitoring Fault chapter.
Log List
Display the log list, to know about more log
information, see Log List chapter.
Version Info List
Display firmware version for MCU/DSP/
Netcard/Telephone chips.

Ateis IDA8S Specifications

General

Brand	Ateis
Model	IDA8S
Category	Security System
Language	English