System Products 93
© 2020, ATEÏS. All rights reserved.
3.2.1.2.5.4 Config
View the information/properties of PASS-AS. The PSS-AS will request you to enter the password
before entering the [Config] page.
3.2.1.2.6 Troubleshooting
This chapter will help you to diagnose and solve the common problems with detailed explanation,
any other information should be listed here as reference as well.
3.2.1.2.6.1 Fault LED
Issue (the PSS AS is unable to connect by ATEIS Studio software)
The situation happens when the PSS AS unit has lost communication with audio processor.
Please follow the instruction in [How to Solve] chapter and check whether the solution meets
your requirements.
Either can users manually modified the problem or our technical personnel will aid you with
service by checking and repairing the problem.
The LED indicators:
When the FAULT LED blinks
To Next Page
Loading...
Need help?
General
