IDA8 Global-Net User Manual350
© 2020, ATEÏS. All rights reserved.
Dead Zone:
If the sensing microphone doesn't detect more noise than during the calibration process, the A.
N.G. will be in [Dead Zone]. See the picture on the right.
When using the A.N.G
components, the max. number of
ANM unit which connects to IDA8
depends on the [DSP Power]. See
the picture on the right.
It requires additional audio input
board due to that there has only
one audio input for each PDC port.
6.2.3 Compressor/Compressor Stereo
The Compressor allows to decrease the level which with louder sound dynamically while quiet
sounds remain untreated. In this way, the quiet sounds are more audible without the loud sounds are
being too loud, this improves the audibility of audio in noisy environments. Compressor Stereo
component is the same as the Compressor component, but works on both stereo output channels.
To Next Page
Loading...
Need help?
General
