IDA8 Global-Net User Manual364
© 2020, ATEÏS. All rights reserved.
6.5 Feedback
The Feedback analyzes the signal, detects the feedback and attenuates the responsible frequency.
There is several types of feedback components. The difference is only the bandwidth which is tuned
for Music higher than speech(the bandwidth is decreasing between it). Each category has 4 kinds of
feedback filters(4, 8 12 or 16). The attenuation time of feedback is increased by the number of filters.
Control Window
(All) Bypass: Disable (all) the Feedback operation.
If the All Bypass button is enabled, all the captured values will be erased.
To Next Page
Loading...
Need help?
General
