IDA8 Global-Net User Manual82
© 2020, ATEÏS. All rights reserved.
PSS-AS Settings
Double click PSS AS object to open the settings window, there are 14 pages on the right of
window, each or page is corresponds to a page on PSS AS. There are five tabs on the top of
window containing various settings of each. The following sections describe for each settings of
tab.
3.2.1.2.4.1 Keys & Paging
Key: Allow to set the captions (names) for each key and the operation action.
Key: Refer to the key on the page of PSS AS.
Comment 1/2/3: The text displayed on the key, there are three rows on it Comment 1 is the
first row and so on.
Paging/Other: The check boxes for Paging and Others option are alternative. Choose one of
them to determine the key used for paging or triggering an event.
The priority of paging zones is based on FIFO ''first in first out'' basis when under the same
priority.
Double Click: Optional two modes (Single or Double Click) to activate key buttons in PSS AS.
Double Click Interval (sec): Time interval when activating key buttons in PSS AS.
Paging: Display the zone combination for each key which is configured as paging.
To Next Page
Loading...
Need help?
General
