Ateis IDA8S User Manual

IDA8 Global-Net User Manual480
© 2020, ATEÏS. All rights reserved.
o G. Fault LED on the front panel of the IDA8C/S.
Log:
o "Flash Error" message displays on the touch screen of the IDA8C.
o A text message displays at the [Machine Fault Record] window in Ateis Studio, see the
picture as below.
A buzzing sound will be outputted to the monitoring speaker on the front panel of the IDA8C.
7.2.4 I2C Error
There is an internal error of I2C communication between micro controllers.
Indication:
LED Indicator: When this error is detected, the following LEDs will light up:
o System Fault LED on the front panel of the IDA8C/S.
o G. Fault LED on the front panel of the IDA8C/S.
Log:
o "I2C Error" message displays on the touch screen of the IDA8C.
o A text message displays at the [Machine Fault Record] window in Ateis Studio, see the
picture as below.
A buzzing sound will be outputted to the monitoring speaker on the front panel of the IDA8C.
7.2.5 Local Netcard Boot Failure
The local ATEIS net card has failed.
Indication:
LED Indicator: When this error is detected, the following LEDs will light up:
o System Fault LED on the front panel of the IDA8C/S.
o G. Fault LED on the front panel of the IDA8C/S.
Log:
o "Local Netcard Boot Failure" message displays on the touch screen of the IDA8C.
o A text message displays at the [Machine Fault Record] window in Ateis Studio, see the
picture as below.
A buzzing sound will be outputted to the monitoring speaker on the front panel of the IDA8C.

Ateis IDA8S Specifications

General

Brand	Ateis
Model	IDA8S
Category	Security System
Language	English