Ateis IDA8S User Manual

IDA8 Global-Net User Manual476
© 2020, ATEÏS. All rights reserved.
7.1.36 Net Blacklist
The communication of IDA8 is unstable.
Indication:
LED Indicator: When this error is detected, the following LEDs will light up:
o G. Fault LED on the front panel of the IDA8C/S.
Log:
o "Net Blacklist" message displays at the touch screen of the IDA8C.
o A text message displays at the window [Machine Fault Record] in Ateis Studio, see the
picture as below.
7.1.37 Fan Error
The fan in IDA8 breaks down.
Indication:
LED Indicator: When this error is detected, the following LEDs will light up:
o G. Fault LED on the front panel of the IDA8C/S.
Log:
o "Fan Error" message displays at the touch screen of the IDA8C.
o A text message displays at the window [Machine Fault Record] in Ateis Studio, see the
picture as below.
7.2 Table of System Faults
Name
Description
Detail
Troubleshooting
SSI Error
Audio board control has
failed.
Reboot device.
No Para. Table.
The IDA8 can't find the
DSP parameters.
Please re-store configuration
of ATEIS Studio again.
Flash Error
I2C Z LED No Response
I2C Z LED Driver Error
I2C Z LED Compare Error
I2C LOGICOUT POWER FAN
UEVM No Response
I2C LOGICOUT POWER FAN
UEVM Driver Error
I2C LOGICOUT POWER FAN
An error occurred in the
Nand flash inside
IDA8C/S.
NAND flash access fault
for IDA8C(256MB) or
IDA8S(128MB)
Reboot device.

Ateis IDA8S Specifications

General

Brand	Ateis
Model	IDA8S
Category	Security System
Language	English