Ateis IDA8S User Manual

Fault List & Troubleshooting 477
© 2020, ATEÏS. All rights reserved.
Name
Description
Detail
Troubleshooting
UEVM Compare Error
I2C EVACU IN No Response
I2C EVACU IN Driver Error
I2C EVACU IN Compare Error
I2C POWER DETECT No
Response
I2C POWER DETECT Driver
Error
I2C POWER DETECT
Compare Error
I2C TEMPERATURE No
Response
I2C TEMPERATURE Driver
Error
I2C TEMPERATURE Compare
Error
I2C FRP_BUTTON SLED No
Response
I2C FRP_BUTTON SLED
Driver Error
I2C FRP_BUTTON SLED
Compare Error
I2C FP MONITOR No
Response
I2C FP MONITOR Driver Error
I2C FP MONITOR Compare
Error
I2C PCM3168 No Response
I2C PCM3168 Driver Error
I2C PCM3168 Compare Error
I2C ADAPTER No Response
I2C ADAPTER Driver Error
I2C ADAPTER Compare Error
I2C Error
There is an internal error
of I2C communication
between micro
controllers. Front panel
LED, fan, Evac input,
temperature detect,
button control fail.
Reboot device.
Local Netcard Boot
Failure
The local ATEIS net card
fails. Note: Only for IDA8
local net. Local ATEIS
net card can't boot
1. Reboot device.
2. Re-connect the ribbon
cable of Local netcard.
DSP Boot Failure
There is an internal error
of communication
between micro
controllers inside
devices.
DSP chip can't boot
Reboot device.
Preset Table Error
The structure of the
configuration is not
compatible with the
Please re-store configuration
of ATEIS Studio again.

Ateis IDA8S Specifications

General

Brand	Ateis
Model	IDA8S
Category	Security System
Language	English