Ateis IDA8S User Manual

IDA8 Global-Net User Manual484
© 2020, ATEÏS. All rights reserved.
A buzzing sound will be outputted to the monitoring speaker on the front panel of the IDA8C.
7.2.14 AESEBU Boot Failure
The AESEBU card has failed.
Indication:
LED Indicator: When this error is detected, the following LEDs will light up:
o G. Fault LED on the front panel of the IDA8C/S.
Log:
o "AESEBU Boot Error." message displays at the touch screen of the IDA8C.
o A text message displays at the window [Machine Fault Record] in Ateis Studio, see the
picture as below.
A buzzing sound will be outputted to the monitoring speaker on the front panel of the IDA8C.
7.2.15 Main Board FPGA Boot Error
There is an internal hardware error.
Indication:
LED Indicator: When this error is detected, following LEDs will light up:
o System Fault LED on the front panel of the IDA8C/S.
o G. Fault LED on the front panel of the IDA8C/S.
Log:
o "Main Board FPGA Boot Error" message displays on the touch screen of the IDA8C as:
o A text message displays at the [Machine Fault Record] window in Ateis Studio, see the
picture as below.
A buzzing sound will be outputted to the monitoring speaker on the front panel of the IDA8C.
7.2.16 TEL Boot Failure
The communication between main controller unit and telephone fails.
Indication:
LED Indicator: When this error is detected, the following LEDs will light up:
o System Fault LED on the front panel of the IDA8C/S.
o G. Fault LED on the front panel of the IDA8C/S.
Log:
o "TEL Boot Failure" message displays on the touch screen of the IDA8C.
o A text message displays at the [Machine Fault Record] window in Ateis Studio, see the

Ateis IDA8S Specifications

General

Brand	Ateis
Model	IDA8S
Category	Security System
Language	English