System Products 23
© 2020, ATEÏS. All rights reserved.
3 System Products
3.1 IDA8 Audio Processor
3.1.1 IDA8C
The IDA8C controller houses advanced audio digital signal processing (DSP), matrix control
functions and a digital message player, with front panel access for a fully monitored fireman’s
microphone and emergency trigger buttons. IDA8C also supports amplifier monitoring with hot-swap
amplifiers and loudspeaker line impedance monitoring.
One IDA8C supports to connect to a maximum of 31 slave units via Ateis-Net. The slave units are
available as single zone (IDA8S) or with A/B speaker line configurations (IDA8SAB), or for low-
impedance monitoring (IDA8SL). The LCD touch screen panel on IDA8C gives the operators to see a
detailed overview of the operational status of the entire systems.
Security
In accordance with EN54-16 and BS5839/8, full monitored supervision from paging microphone
capsule to the end of loudspeaker line.
Enhanced loudspeaker line surveillance for A/B zone wiring.
The IDA8C supports redundant network cabling, wired as a redundant loop.
Reporting tools with events log and fault via LCD front panel or Ateis Studio.
Connectivity
Up to 48 simultaneous audio channels per local network.
Up to 256 zones in a local network, and up to 8,192 zones in a global network.
To Next Page
Loading...
Need help?
General
