Ateis IDA8S User Manual

IDA8 Global-Net User Manual98
© 2020, ATEÏS. All rights reserved.
3.2.1.3.1 Control Panel
Microphone:
A 280mm flex microphone.
Power LED:
This LED lights up when the PPM-IT5 is powered on.
Fault LED:
To display fault status of system, this LED will light up permanently if a fault state in the VACIE
system has been engaged.
EVAC LED:
This LED lights up when system is under evacuation paging, this LED will light up permanently if
a evacuation state in the VACIE system has been engaged.
Status
Frequency
Activity
Permanent
System is under evacuation paging.
Left/Middle/Right Button:
Push the button during the half-duplex conversation to activate the following commands below,
this can be programmed via web interface.
Audio Source Select
Audio Level -
Audio Level +
Push To Talk (Intercom)
Push To Talk (Paging)
Push To Talk (Evac Announce)
Monitoring Speaker:
A monitoring loudspeaker to play chime when paging or monitor the signal from audio processor.
Touch Screen:
A back-lit touch screen with 5" diagonal and 800 x 480 resolution, each buttons in the PPM-IT5
can be freely configured as a zone paging button or parameter adjustment in audio processor
such as IDA8.

Ateis IDA8S Specifications

General

Brand	Ateis
Model	IDA8S
Category	Security System
Language	English