Ateis IDA8S User Manual

System Products 161
© 2020, ATEÏS. All rights reserved.
When first-installing the remotes on Ateis Studio, you need to click the "Remote Plug-in"
function on the right grid of the Device Management to make the audio processor to
recognize it. See Remote Plug-in for details.
DSP Component Configuration
The DialPad needs to be processed dialing with Telephone Card component. See [Telephone
Card] component [TC Receive / TC Transmit] for details. Telephone Card component shall be
simply used by [Drag and Drop] to the editing slide to create this component for configuration.
The figure below shows how component template works with the configuration window.
After the action completed, start to [Compile] and [Store] on the Tools Bar to finish the installation
procedure.
Start the compile process. This action enhances Ateis Studio software to verify whether
there's any major errors remain before uploading the design into audio processor.
Start the store process. This action enhances to upload your configuration into the audio
processor.

Ateis IDA8S Specifications

General

Brand	Ateis
Model	IDA8S
Category	Security System
Language	English