Ateis IDA8S User Manual

IDA8 Global-Net User Manual250
© 2020, ATEÏS. All rights reserved.
2. Select "Sub-Presets" tab on [Presets] window.
Master Preset Drop-Down Box: Click to switch to the desired Master Preset and then edit
the Sub-Preset settings which is belonging to it.
Linked Elements: Open the window contained a table of elements controlled by the Sub-
Preset. See the later section "Table of Linked Elements" for more detail.
Save: Save a value of linked elements to the Sub-Preset. Those values are kept in the
memory in Sub-Preset.
Load: Load values from the storage of Sub-Preset and set to the linked elements.
Add/Remove: Create a new Sub-Preset/remove a selected Sub-Preset.
Assign an Element to be Controlled by Sub-Presets
Right click the element of component you want to control, and select your Sub-Preset.
Table of Linked Elements
List all the elements controlled by Sub-Preset. There's a small panel on the right with an
embedded graphic control, this is for adjusting the stored value in Sub-Preset.
Device: The Ateis device containing the linked element.
Component: The component containing the linked element.

Ateis IDA8S Specifications

General

Brand	Ateis
Model	IDA8S
Category	Security System
Language	English