Ateis IDA8S User Manual

DSP Components 447
© 2020, ATEÏS. All rights reserved.
Click [.......] button to open the
[Select Zone] window.
Then click [Add] button to open the
[Add Code] window.
If you would like to add a new code,
click [Add] button to open the [Add
Code] window. There are two ways
to create a new code: Single and
Range. The code can be user-
defined. 0 and minus number are
forbidden to use. eg: 0, -1, -10 etc.
Click [......] button to open the [Zone]
window and then start to choose
which zone you assign for paging.
Click [Add] button if you would like to
create more codes.
After that, double click the [TC
Receive] component to open its
window, select the item in [Paging]
drop-down box you have created.
Then click [Store] button to save the
settings into the machine.
Before calling via DTMF code, please follow the instruction of paging method.
Dial = #X
o # = start
o = end
Example:
o If you would like to paging to
Code [2], then dial #2
o The paging function will be
activated right way after finishing
Redial:
When dialing the wrong code, simply redial the correct
code again after the wrong code.
Example:
o If you dial the Code [3] to the wrong Code [2], you
only need to redial the correct code again (2) after
the wrong one. The situation might be shown as
#2#3
o If the code you dial has been set as the EVAC, the

Ateis IDA8S Specifications

General

Brand	Ateis
Model	IDA8S
Category	Security System
Language	English