Ateis IDA8S User Manual

IDA8 Global-Net User Manual86
© 2020, ATEÏS. All rights reserved.
o Warning Tone Volume: Volume up/down for the warning tone.
Warning tone is a tone which warns users that the circuit is connected to or is not in
condition for normal operation.
o EVAC: Enable to display the selected EVAC mode on the button of PSS-AS.
o Mic. open in Bypass Mode: Enable to be in bypass mode and trigger audio paging via
microphone automatically.
o Paging Source: Enable or disable the paging source on the button of PSS-AS.
o Audio Source Selection: Enable to activate the Select Input & Output Source page on PSS-
AS.
o Using Font File: Enable to activate the custom font setting.
o Auto reset selection after paging: Enable to deselect the zone buttons on PSS-AS panel after
paging.
o Headphone audio detect: Enable this option to let the PSS-AS auto detect when an external
headphone jack is connected on PSS-AS, and use it for speaker output.
Faults:
o Report Faults: Enable to display the fault status on the button of PSS-AS. Eg: error message.
o Display:
Major: Only display the major faults on the button of PSS-AS.
All: Display all the faults on the button of PSS-AS.
o Warning Tone:
Off: Disable the warning tone function on PSS-AS.
Major: Enable the warning tone function when major faults are detected on PSS-AS.
All: Enable the warning tone function when any of the fault is detected on PSS-AS.
Warning Tone Level (dB): Adjust the level of warning tone on PSS-AS.

Ateis IDA8S Specifications

General

Brand	Ateis
Model	IDA8S
Category	Security System
Language	English