EasyManua.ls Logo

Belarus 892 - Tow Hitches; General Information

Belarus 892
312 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
892-0000010B OM
139
3.13 Tow hitches
3.13.1 General information
The tow hitch of the BELARUS-892/892.2 with draft control unit can be equipped with
coupling units TSU-2 (hydraulic hook), TSU-1M (pendulum), TSU-1M-02 (combined unit hydrau-
lic hook+ pendulum), lowering link, TSU-1Zh (crossbar) and TSU-1Zh-01 (twin crossbar) ensur-
ing coupling and transporting of trailed and semi-trailed machines (if TSU-2 is installed
semitrailers also), the coupling devices of which correspond to the following requirements:
- compatibility according to the coupling dimensions;
- machines are equipped with rigid coupling devices;
- draft poles of trailers are equipped with a device making the procedure of cou-
pling/uncoupling with the tow hitch of the tractor easier;
- coupling units of the semitrailers have an adjustable support.
Installation variant scheme of TSU-2 (hydraulic hook) and TSU-1M-02 with hydraulic
hook in the operating position is shown in Figure 3.13.1.
Installation variant scheme of TSU-1M-02 with pendulum (TSU-1M) in operation po-
sition is shown in Figure 3.13.2.
Installation variant scheme of TSU-1M (pendulum) is shown in Figure 3.13.3.
Installation variant scheme of lowering link is shown in Figure 3.13.4.
Installation scheme of TSU -1ZH (crossbar) is shown in Figure 3.13.5.
Installation variant scheme of TSU-1ZH-01 (twin crossbar) is shown in Figure 3.13.6.
The rules for repositioning of hydraulic hook TSU-2 and pendulum TSU-1M in the
combined unit TSU-1M-02 from additional position into operation position and from opera-
tion position into additional position are given in subsection 3.13.9 “Repositioning of coupling
elements in combined unit TSU-1M-02”.
Basic parameters of tow hitches shown in Tables and in Figures of subsection 3.13
„Tow hitches“ are given with standard rear tires (18.4R34 (F-11) both single and twin
mounted to the tractors with FDA 822-2300020-02/04; 16.9R38 both single and twin mounted
to the tractors with FDA 72-2300020-А-04) and with standard static radius, specified by the
tire manufacturer.

Table of Contents

Related product manuals