892-0000010B OM
156
3.15.3 Exterior mirrors
Adjustment of the visibility zone in exterior mirrors 1 (Figure 3.15.3) is carried out by
turning bracket 2 in the horizontal plane and turning mirror 1 around its mounting in the
vertical and horizontal plane.
1 – exterior mirrors; 2 – bracket.
Figure 3.15.3 – Adjustment of exterior mirror position
3.15.4 Mounting and dismantling of canopy frame (canopy base).
The canopy frame (canopy base), as well as the complete cabin, are mounted on the
tractor body through vibration insulators 4 (Figure 3.15.1).
When dismantling the canopy frame (canopy base), you must:
- remove cotter pins 1;
- unscrew nuts 2;
- remove bolts 3;
- remove the canopy frame with a beam crane having a lifting capacity of at least 1000
kg, using two eyelets 1 (Figure 3.15.4) welded to upper longitudinal beams 2 of the canopy
frame to secure the chains (cables) (with the canopy base installed, use the places indicated
by arrows in Figure 3.15.5 to secure the chains (cables).
1 – eyelet; 2 – upper longitudinal beam.
Figure 3.15.4 – Slinging of canopy frame
To Next Page
Loading...
