892-0000010B OM
198
5 Coupling of implements
5.1 General information
In section 5 "Coupling of implements" necessary instructions and data on features of
application of BELARUS-892/892.2 tractors are given.
Permitted field of application of BELARUS-892/892.2 tractors includes places with
unrestricted air exchange, sufficient flotation and overall passing ability.
BELARUS-892/892.2 tractors are designed for performance of the mechanized works
in plant growing and fodder production.
BELARUS-892/892.2 tractors are packaged with necessary work equipment for cou-
pling of implements i.e. rear lift linkage, drawbar hitches, rear PTO, side semi-independent
PTO, hydraulic feed-outs, pneumatic head and electrical outlet receptacle. The tractor imple-
ments listed above allow coupling of implements of various machines in structure of MTU (ma-
chine and tractor unit or tractor-mounted units).
ATTENTION: BELARUS-892/892.2 TRACTORS ARE DESIGNED FOR COUPLING OF
MOUNTED, SEMI-MOUNTED, SEMI-TRAILED AND TRAILED IMPLEMENTS IN STRUC-
TURE OF МТU ONLY, TECHNICAL CHARACTERISTICS OF WHICH, RELATED TO ABILITY
TO BE COUPLED, ARE COMPARABLE TO TRACTOR SPECIFICATIONS! OTHER APPLICA-
TION OF TRACTOR IS NOT ALLOWED!
Selection and buying of agricultural implements (fertilizer distributors, plungers, motor cul-
tivators, harrows, seeding machines, rotary tooling and other implements) for tractors “BELARUS-
892/892.2” is carried out by the customer itself according to its needs, and with consideration of
the implement and tractor performance specifications, and also local conditions i.e. agrotechnical
requirements, soil conditions, personal experience, guidelines of corresponding regional advisory
centers and institutions for agricultural industry.
ATTENTION: GUIDELINES AND DATA ON SPECIFIC ASPECTS OF USAGE OF IM-
PLEMENTS WITH A TRACTOR AND DATA ON THE RECOMMENDED TRACTOR PERFOR-
MANCE SPECIFICATIONS ARE PRESENTED IN OPERATIONAL DOCUMENTATION FOR
IMPLEMENTS COUPLED!
Possibilities of agricultural tractors applications in the specified use environment are limited
by tolerance range of force, exerted on hook rating and engine power, tractor maximum permis-
sible load, roadhold of chassis, frictional sliding, operation driving speed, size power take-off value
and operating weight of the implements coupled.
ATTENTION: WHILE OPERATING TRACTOR IN STRUCTURE OF МТU IT IS RE-
QUIRED TO STUDY AND FOLLOW THE INSTRUCTIONS SET FORTH IN THE OPERA-
TIONAL DOCUMENTATION OF IMPLEMENTS COUPLED WITH A TRACTOR CARE-
FULLY! PERSONNEL NOT HAVING STUDIED DOCUMENTATION AND SAFE MACHINE
OPERATING PROCEDURES, AND HAVING NO DOCUMENTS ON-SITE, IS NOT AL-
LOWED!
ATTENTION: WHEN COUPLING OF MOUNTED, SEMI-MOUNTED, SEMI-TRAILED
AND TRAILED IMPLEMENTS WITH BELARUS-892/892.2 TRACTORS, INSTALLATION OF
AUTOMATED CONTROL SYSTEMS, BEING THE PART OF THE MACHINE KIT, FOR
TRACING OF OPERATIONS SEQUENCE IN THE CABIN, AND ITS CONNECTION TO
THE BOARD NETWORK IS ALLOWED IF IT IS PROVIDED FOR IN THE OPERATIONAL
DOCUMENTS FOR THE IMPLEMENTS.
To Next Page
Loading...
