892-0000010B OM
171
3.17 Marking of tractor components
3.17.1 Engine marking
The engine nameplate attached on the cylinder block indicates:
- name of the manufacturer and its trademark;
- model (modification) of the engine;
- engine serial number;
- inscription “Made in Belarus” (in English).
On the cylinder block there is indication of the engine serial number, which is identical
to the number stated in the nameplate, as well as of the engine version according to the
specifications. The engines that are granted national certificates of conformity of the Repub-
lic of Belarus or Commonwealth of Independent States members, have attached the con-
formity marks of National certification systems of the countries that have issued the certifi-
cates. Conformity marks are located next to or on the nameplate.
3.17.2 Cabin number
A metal plate that bears the designation and number of the cab is attached inside the
cab on the left, under side window, as shown in Figure 3.17.1.
Figure 3.17.1 – Location of the cabin’s marking plate
3.17.3 Coupling clutch body number
The location of coupling clutch body number is given in Figure 3.17.2.
Figure 3.17.2 – Location of coupling clutch body number
3.17.4 Gearbox number
The location of the gearbox number is shown in Figure 3.17.3.
Figure 3.17.3 – The location of the gearbox number
To Next Page
Loading...
