892-0000010B OM
200
- trailed implement is usually fixed in one point by means of tractor drawbar clevis to the DH.
It is also possible to use a two-point connection with lift linkage (upper draft arm is not used).
The chassis can carry weight of an implement in full, hitch mechanism (DH or LL) is loaded
only by weight of implement connector. While changing the implement position from operat-
ing to transport, position of the point in which the implement is connected to the tractor
remains unchanged. Semi-trailed implements include various vehicles for general and spe-
cial purposes: general purpose semi-trailers, tank semi-trailers, and dampers, and special
purpose semi-trailed vehicles for mechanizing of technological process in the agricultural
sector.
To Next Page
Loading...
