Belarus 892 - Page 231

892-0000010B OM
231
Table 6.3.1 finished
Opera-
tion №
Operation description
Periodicit
y
, h
8-10 125 250 500 1000
2
000
58 Flush engine cooling system and replace cool-
ant X
59 Check/ad
j
ust fuel pump on the bench X
60 Check atomizers for injection start pressure and
fuel atomization qualit
y
X
61 Check/ad
j
ust fuel in
j
ection advance an
g
le X
62
Adjust oil pressure in the engine lubrication sys-
tem
A
s oil pressure in the engine lu-
brication system deviates from
the norm
63 Service en
g
ine air cleane
r
A
s it
g
ets clo
gg
ed
____________________________________________________________________________________________________________________________
_
______________________
_
1)
The operation is carried out once with the first STM (after 8-10 hours of operation)
performed by the customer and then after each 125 hours of tractor operation.
2)
The operation is performed on the BELARUS-892 tractors (FDA with bevel wheel gear
groups).
3)
The operation is performed on the BELARUS-892.2 tractors (FDA with spur planetary
wheel gear groups).
4)
Monitoring, and, if necessary, bringing the internal pressure in tractor tires to the norm,
is carried out every time when the tractor is switched from one type of work to another and the
machines and implements attached to it are changed.
5)
The frequency of checking and servicing the battery is once every 3 months, at least.
6)
The first and second replacement is carried out after 500 hours of tractor operation.
Further replacement must be made every 1000 hours of operation, simultaneously with an oil
change.
7)
Operation is performed only on geared lifting rods.