Cisco SGE2000 - Cisco - Gigabit Switch Administration Guide

Getting Started
Using the Cisco Management Buttons
Cisco Small Business SFE/SGE Managed Switches Administration Guide 5
1
Using the Cisco Management Buttons
Device Management buttons provide an easy method of configuring device
information, and include the following:
Using Screen and Table Options
The User Interface contains screens and tables for configuring devices. This
section contains the following topics:
• Adding Device Information
• Modifying Device Information
• Deleting Device Information
Adding Device Information
User defined information can be added to specific interface pages, by opening a
new Add page. To add information to tables or interface pages:
STEP 1 Open an interface page.
STEP 2 Click the Add button. An add page opens, for example, the Add SNTP Server
Page
:
Device Management Buttons
Button Name Description
Apply Applies changes to the device
Clear Counters Clears statistic counters
Clear Logs Clears log files
Add Opens an Add page
Delete Removes entries from tables
Test Performs cable tests

Cisco SGE2000 - Cisco - Gigabit Switch Specifications

General

Form Factor	Rack-mountable
Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
Layer	Layer 2
Power Supply	Internal
Management	Web-based, SNMP, CLI
MAC Address Table Size	8000 entries
VLANs	256
Features	Quality of Service (QoS), IGMP snooping, Port mirroring
Dimensions (W x D x H)	440 x 257 x 44 mm (17.3 x 10.1 x 1.73 in)
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-20 to 70°C (-4 to 158°F)
Relative Humidity	10% to 90% non-condensing
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x