Cisco SGE2000 - Cisco - Gigabit Switch Administration Guide

Getting Started
Understanding the Interface
Cisco Small Business SFE/SGE Managed Switches Administration Guide 3
1
System Information Page
If the login attempt fails because the user typed an incorrect username or
password, the following message appears: “Invalid Username or Password.
Please try again.”
If the login attempt fails due to another problem one of the following error
messages appears:
“Login failed since too many users are logged in.”
“Login failed due to PC configuration problems.”
“There is no response from the server.”
Understanding the Interface
The Interface Components Page displays the interface components with their
corresponding numbers.

Cisco SGE2000 - Cisco - Gigabit Switch Specifications

General

Form Factor	Rack-mountable
Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
Layer	Layer 2
Power Supply	Internal
Management	Web-based, SNMP, CLI
MAC Address Table Size	8000 entries
VLANs	256
Features	Quality of Service (QoS), IGMP snooping, Port mirroring
Dimensions (W x D x H)	440 x 257 x 44 mm (17.3 x 10.1 x 1.73 in)
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-20 to 70°C (-4 to 158°F)
Relative Humidity	10% to 90% non-condensing
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x