Cisco SGE2000 - Cisco - Gigabit Switch Administration Guide

Contents
Cisco Small Business SFE/SGE Managed Switches Administration Guide 1
Contents
Chapter 1: Getting Started 1
Starting the Application 1
Understanding the Interface 3
Using the Cisco Management Buttons 5
Using Screen and Table Options 5
Adding Device Information 5
Modifying Device Information 6
Deleting Device Information 7
Logging Off of the Device 7
The About Page 7
Chapter 2: Managing Device Information 9
Defining System Information 9
Managing Stacking 11
Understanding Switch Operating Modes 11
Configuring a Stack 12
Stack Membership 14
Defining Stacking Unit ID 15
Adding, Replacing and Removing Stacking Members — Examples 21
Managing Stacks 23
Viewing Device Health 25
Resetting the Device 26
Defining Bonjour 27
Disabling Bonjour 29
TCAM Utilization 30
Chapter 3: Configuring System Time 33
Defining System Time 33
Defining SNTP Settings 36

Cisco SGE2000 - Cisco - Gigabit Switch Specifications

General

Form Factor	Rack-mountable
Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
Layer	Layer 2
Power Supply	Internal
Management	Web-based, SNMP, CLI
MAC Address Table Size	8000 entries
VLANs	256
Features	Quality of Service (QoS), IGMP snooping, Port mirroring
Dimensions (W x D x H)	440 x 257 x 44 mm (17.3 x 10.1 x 1.73 in)
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-20 to 70°C (-4 to 158°F)
Relative Humidity	10% to 90% non-condensing
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x