Cisco SGE2000 - Cisco - Gigabit Switch Administration Guide

Configuring Device Security
Passwords Management
Cisco Small Business SFE/SGE Managed Switches Administration Guide 41
4
Configuring Device Security
The Security Suite contains the following topics:
• Passwords Management
• Defining Authentication
• Defining Access Methods
• Defining Traffic Control
• Defining 802.1X
• Defining Access Control
• Defining DoS Prevention
• Defining DHCP Snooping
• Defining Dynamic ARP Inspection
Passwords Management
This section contains information for defining passwords. Passwords are used to
authenticate users accessing the device. By default, a single user name is defined,
admin, with the password
admin . An additional user name/ password can also be
configured.
To d e f i n e P a s s w o r d s :

Cisco SGE2000 - Cisco - Gigabit Switch Specifications

General

Form Factor	Rack-mountable
Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
Layer	Layer 2
Power Supply	Internal
Management	Web-based, SNMP, CLI
MAC Address Table Size	8000 entries
VLANs	256
Features	Quality of Service (QoS), IGMP snooping, Port mirroring
Dimensions (W x D x H)	440 x 257 x 44 mm (17.3 x 10.1 x 1.73 in)
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-20 to 70°C (-4 to 158°F)
Relative Humidity	10% to 90% non-condensing
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x