Cisco SGE2000 - Cisco - Gigabit Switch Administration Guide

Configuring Ports
Cisco Small Business SFE/SGE Managed Switches Administration Guide 159
5
Modifying Port Settings
STEP 1 Click Bridging > Port Management > Port Settings. The Port Settings Page opens:
STEP 2 Define the Unit number.
STEP 3 Click a specific entry’s Edit button. The Edit Port Page opens:
Edit Port Page
The
Edit Port Page contains the following fields:
• Port — Displays the port number.
• Description — Specifies the port’s user-defined name.
• Port Type — Displays the port type.The possible field values are:
- 1000M — Copper (copper cable).

Cisco SGE2000 - Cisco - Gigabit Switch Specifications

General

Form Factor	Rack-mountable
Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
Layer	Layer 2
Power Supply	Internal
Management	Web-based, SNMP, CLI
MAC Address Table Size	8000 entries
VLANs	256
Features	Quality of Service (QoS), IGMP snooping, Port mirroring
Dimensions (W x D x H)	440 x 257 x 44 mm (17.3 x 10.1 x 1.73 in)
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-20 to 70°C (-4 to 158°F)
Relative Humidity	10% to 90% non-condensing
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x