Cisco SGE2000 - Cisco - Gigabit Switch Administration Guide

Configuring Device Security
Defining Authentication
Cisco Small Business SFE/SGE Managed Switches Administration Guide 47
4
Modifying an Authentication Profile
STEP 1 Click Security Suite > Authentication > Profiles. The Profiles Page opens:
STEP 2 Click the Edit Button. The Edit Authentication Profile Page opens:
Edit Authentication Profile Page
The
Edit Authentication Profile Page contains the following fields:
• Profile Name — Displays the Authentication profile name.
• Authentication Methods — Defines the user authentication methods. The
possible field values are:
- Local — Authenticates the user at the device level. The device checks
the user name and password for authentication.
- RADIUS — Authenticates the user at the RADIUS server.
- TA CAC S + — Authenticates the user at the TACACS+ server.
- None — Indicates that no authentication method is used to authenticate
the device.
STEP 3 Define the relevant fields.
STEP 4 Click Apply. The authentication profile is defined, the device is updated.

Cisco SGE2000 - Cisco - Gigabit Switch Specifications

General

Form Factor	Rack-mountable
Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
Layer	Layer 2
Power Supply	Internal
Management	Web-based, SNMP, CLI
MAC Address Table Size	8000 entries
VLANs	256
Features	Quality of Service (QoS), IGMP snooping, Port mirroring
Dimensions (W x D x H)	440 x 257 x 44 mm (17.3 x 10.1 x 1.73 in)
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-20 to 70°C (-4 to 158°F)
Relative Humidity	10% to 90% non-condensing
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x