Cisco SGE2000 - Cisco - Gigabit Switch - Viewing Ipv6 Routes Table

Configuring IP Information
IP Addressing
Cisco Small Business SFE/SGE Managed Switches Administration Guide 203
7
Viewing IPv6 Routes Table
The IPv6 Routes Table Page allows network managers to view IPv6 network
routes. To view IPv6 routing entries:
STEP 1 Click >System > System Management > IP Addressing > IPv6 Configuration >
IPv6 Routes Table. The
IPv6 Routes Table Page opens:
IPv6 Routes Table Page
The
IPv6 Routes Table Page contains the following fields:
• Clear Table — Deletes the entries in the IPv6 Routes Table. The possible field
values are:
- Static Only — Deletes the static IPv6 address entries from the IPv6
Routes Table.
- Dynamic Only — Deletes the dynamic IPv6 address entries from the
IPv6 Routes Table.
- All Dynamic and Static — Deletes the static and dynamic address
entries IPv6 address entries from the IPv6 Routes Table.
• Interface _— Indicates the interface that is used to forward the packet.
• IPv6 Address — Displays the destination IPv6 address.