Cisco SGE2000 - Cisco - Gigabit Switch Administration Guide

Managing Device Diagnostics
Viewing CPU Utilization
Cisco Small Business SFE/SGE Managed Switches Administration Guide 348
15
Viewing CPU Utilization
The CPU Utilization Page contains information about the system’s CPU utilization.
CPU Utilization Page
The
CPU Utilization Page contains the following fields:
• CPU Utilization — Displays CPU resource utilization information. The possible
field values are:
- Enabled — Enables viewing CPU utilization information. This is the
default value.
- Disabled — Disables viewing the CPU utilization information.
• Refresh Rate — Amount of time that passes before the statistics are refreshed.
The possible field values are:
- No Refresh — Indicates that the CPU utilization statistics are not
refreshed.
- 15 Sec — Indicates that the CPU utilization statistics are refreshed
every 15 seconds.
- 30 Sec — Indicates that the CPU utilization statistics are refreshed
every 30 seconds.

Cisco SGE2000 - Cisco - Gigabit Switch Specifications

General

Form Factor	Rack-mountable
Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
Layer	Layer 2
Power Supply	Internal
Management	Web-based, SNMP, CLI
MAC Address Table Size	8000 entries
VLANs	256
Features	Quality of Service (QoS), IGMP snooping, Port mirroring
Dimensions (W x D x H)	440 x 257 x 44 mm (17.3 x 10.1 x 1.73 in)
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-20 to 70°C (-4 to 158°F)
Relative Humidity	10% to 90% non-condensing
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x