Cisco SGE2000 - Cisco - Gigabit Switch Administration Guide

Managing System Logs
Viewing the Flash Logs
Cisco Small Business SFE/SGE Managed Switches Administration Guide 353
16
• Log Time — Displays the time at which the log entry was generated.
• Severity — Displays the event severity.
• Description — Displays the log message text.
Clearing Message Logs
Message Logs can be cleared from the Memory Page . To clear the Memory Page :
STEP 1 Click Admin > Logs > Memory. The Memory Page opens.
STEP 2 Click the Clear Logs button. The message logs are cleared.
Viewing the Flash Logs
The Flash Page contains information about log entries saved to the Log File in
FLASH, including the time the log was generated, the event severity, and a
description of the log message. The Message Log is available after reboot.
To v i e w t h e F l a s h L o g s :

Cisco SGE2000 - Cisco - Gigabit Switch Specifications

General

Form Factor	Rack-mountable
Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
Layer	Layer 2
Power Supply	Internal
Management	Web-based, SNMP, CLI
MAC Address Table Size	8000 entries
VLANs	256
Features	Quality of Service (QoS), IGMP snooping, Port mirroring
Dimensions (W x D x H)	440 x 257 x 44 mm (17.3 x 10.1 x 1.73 in)
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-20 to 70°C (-4 to 158°F)
Relative Humidity	10% to 90% non-condensing
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x