Cisco SGE2000 - Cisco - Gigabit Switch Administration Guide

Configuring Device Security
Defining Access Methods
Cisco Small Business SFE/SGE Managed Switches Administration Guide 61
4
Defining Access Profiles
Access profiles are profiles and rules for accessing the device. Access to
management functions can be limited to user groups. User groups are defined for
interfaces according to IP addresses or IP subnets. Access profiles contain
management methods for accessing and managing the device. The device
management methods include:
• All
• Te l n e t
• Secure Telnet (SSH)
• HTTP
• Secure HTTP (HTTPS)
• SNMP
Management access to different management methods may differ between user
groups. For example, User Group 1 can access the switch module only via an
HTTPS session, while User Group 2 can access the switch module via both
HTTPS and Telnet sessions. The Access Profile Page contains the currently
configured access profiles and their activity status. Assigning an access profile to
an interface denies access via other interfaces. If an access profile is assigned to
any interface, the device can be accessed by all interfaces.
To define access profiles:

Cisco SGE2000 - Cisco - Gigabit Switch Specifications

General

Form Factor	Rack-mountable
Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
Layer	Layer 2
Power Supply	Internal
Management	Web-based, SNMP, CLI
MAC Address Table Size	8000 entries
VLANs	256
Features	Quality of Service (QoS), IGMP snooping, Port mirroring
Dimensions (W x D x H)	440 x 257 x 44 mm (17.3 x 10.1 x 1.73 in)
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-20 to 70°C (-4 to 158°F)
Relative Humidity	10% to 90% non-condensing
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x