Cisco SGE2000 - Cisco - Gigabit Switch - Modifying the Local User Settings

Configuring Device Security
Passwords Management
Cisco Small Business SFE/SGE Managed Switches Administration Guide 43
4
• Password — Specifies the new password. The is not displayed. As it entered
an * corresponding to each character is displayed in the field. (Range: 1-159
characters)
• Confirm Password — Confirms the new password. The password entered into
this field must be exactly the same as the password entered in the Password
field.
STEP 3 Click the Delete button to cancel the selected Profile Name.
Modifying the Local User Settings
STEP 1 Click Security Suite > Passwords Management > User Authentication. The User
Authentication Page
opens:
STEP 2 Click the Edit Button. The Edit Local User Page opens:
Edit Local User Page
The
Edit Local User Page contains the following fields:
• User Name — Displays the user name.
• Password — Specifies the new password. The password is not displayed. As
it entered an * corresponding to each character is displayed in the field. (Range:
1-159 characters)
• Confirm Password — Confirms the new password. The password entered into
this field must be exactly the same as the password entered in the Password
field.
STEP 3 Define the relevant fields.