Cisco SGE2000 - Cisco - Gigabit Switch - Defining GVRP Settings

Configuring VLANs
Defining GVRP Settings
Cisco Small Business SFE/SGE Managed Switches Administration Guide 173
6
Defining GVRP Settings
GARP VLAN Registration Protocol (GVRP) is specifically provided for automatic
distribution of VLAN membership information among VLAN-aware bridges. GVRP
allows VLAN-aware bridges to automatically learn VLANs to bridge ports
mapping, without having to individually configure each bridge and register VLAN
membership.
The Global System LAG information displays the same field information as the
ports, but represents the LAG GVRP information.
To d e f i n e G V R P.
STEP 1 Click Bridging > VLAN Management > GVRP Settings. The GVRP Settings Page
opens:
GVRP Settings Page
The
GVRP Settings Page contains the following fields:
• GVRP Global Status — Indicates if GVRP is enabled on the device. The
possible field values are:
- Enable — Enables GVRP on the device.
- Disable — Disables GVRP on the device.