Cisco SGE2000 - Cisco - Gigabit Switch Administration Guide

Managing Device Information
Defining Bonjour
Cisco Small Business SFE/SGE Managed Switches Administration Guide 27
2
STEP 1 Click System > System Management > Reset. The Reset Page opens:
Reset Page
STEP 2 Click one of the available Reset commands. The device resets.
STEP 3 Enter the user name and password to reconnect to the Web Interface.
Defining Bonjour
Bonjour is a service discovery protocol that enables automatic discovery of
computers, devices and services on IP networks. Bonjour’s
multicast Domain
Name System
(mDNS) service allows the device to publish device services by
sending and receiving UDP packets only to the following multicast address
224.0.0.251 and to port number 5353.
The
Bonjour Page contains information for enabling/disabling Bonjour on the
device, specifying a Service Type and the related port used for publishing
devices over the network. A Service Type is the type of service registration
performed as part of the device system start up. It is intended to assure the
uniqueness of the published service and proclaims the related information. The
device information published via DNS includes the following details:

Cisco SGE2000 - Cisco - Gigabit Switch Specifications

General

Form Factor	Rack-mountable
Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
Layer	Layer 2
Power Supply	Internal
Management	Web-based, SNMP, CLI
MAC Address Table Size	8000 entries
VLANs	256
Features	Quality of Service (QoS), IGMP snooping, Port mirroring
Dimensions (W x D x H)	440 x 257 x 44 mm (17.3 x 10.1 x 1.73 in)
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-20 to 70°C (-4 to 158°F)
Relative Humidity	10% to 90% non-condensing
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x