Cisco SGE2000 - Cisco - Gigabit Switch - Defining SNMP Filter Settings

Configuring SNMP
Defining Trap Management
Cisco Small Business SFE/SGE Managed Switches Administration Guide 327
12
STEP 3 Define the relevant fields.
STEP 4 Click Apply. The SNMP Notification Receivers are defined, and the device is
configured.
Defining SNMP Filter Settings
The Filter Settings Page permits filtering traps based on OIDs. Each OID is linked
to a device feature or a feature aspect. The Filter Settings Page also allows
network managers to filter notifications.
STEP 1 Click System > SNMP > Trap Management > Filter Settings. The Filter Settings
Page
opens:
Filter Settings Page
The
Filter Settings Page contains the following fields:
• Filter Name — Contains a list of user-defined notification filters.
• Object ID Subtree — Displays the OID for which notifications are sent or
blocked. If a filter is attached to an OID, traps or informs are generated and sent
to the trap recipients.
• Filter Type — Indicates whether informs or traps are sent regarding the OID to
the trap recipients.