Cisco SGE2000 - Cisco - Gigabit Switch - Page 337

Configuring SNMP
Defining Trap Management
Cisco Small Business SFE/SGE Managed Switches Administration Guide 328
12
- Excluded — Restricts sending OID traps or informs.
- Included — Sends OID traps or informs.
STEP 2 Click the Add button. The Add SNMP Notification Filter Page opens:
Add SNMP Notification Filter Page
The
Add SNMP Notification Filter Page contains the following fields:
• Filter Name — Contains a list of user-defined notification filters.
• New Object Identifier Tree — Displays the OID for which notifications are sent
or blocked. If a filter is attached to an OID, traps or informs are generated and
sent to the trap recipients. Object IDs are selected from either the Select from
List or the Object ID List. There are two configuration options:
- Select from List — Select the OID from the list provided. Pressing the Up
and
Down buttons allows you to change the priority by moving the
selected subtree up or down in the list.
- Object ID — Enter an OID not offered in the Select from List option.
• Filter Type — Indicates whether OID-based informs or traps are sent to trap
recipients.
- Excluded — Restricts sending OID traps or informs.
STEP 3 Define the relevant fields.
STEP 4 Click Apply. The device is updated.