Cisco SGE2000 - Cisco - Gigabit Switch Administration Guide

Managing System Logs
Viewing the Device Memory Logs
Cisco Small Business SFE/SGE Managed Switches Administration Guide 352
16
• Memory Logs — The selected Severity types will appear in chronological
order in all system logs that are saved in RAM (Cache). After restart, these logs
are deleted.
• Log Flash — The selected Severity types will be sent to the Logging file kept in
FLASH memory. After restart, this log is not deleted.
STEP 2 Define the relevant fields.
STEP 3 Click Apply. The device is updated.
Viewing the Device Memory Logs
The Memory Page contains all system log entries in chronological order that are
saved in RAM (Cache). After restart, these log entries are deleted.
To open the
Memory Page:
STEP 1 Click Admin > Logs > Memory. The Memory Page opens.
Memory Page
The
Memory Page contains the following fields:
• Log Index — Displays the log entry number.

Cisco SGE2000 - Cisco - Gigabit Switch Specifications

General

Form Factor	Rack-mountable
Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
Layer	Layer 2
Power Supply	Internal
Management	Web-based, SNMP, CLI
MAC Address Table Size	8000 entries
VLANs	256
Features	Quality of Service (QoS), IGMP snooping, Port mirroring
Dimensions (W x D x H)	440 x 257 x 44 mm (17.3 x 10.1 x 1.73 in)
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-20 to 70°C (-4 to 158°F)
Relative Humidity	10% to 90% non-condensing
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x