Aggregating Ports
Configuring LACP
Cisco Small Business SFE/SGE Managed Switches Administration Guide 400
18
Configuring LACP
Aggregate ports can be linked into link-aggregation port-groups. Each group is
comprised of ports with the same speed, set to full-duplex operations.
Aggregated Links can be manually setup or automatically established by enabling
Link Aggregation Control Protocol (LACP) on the relevant links. Aggregate ports
can be linked into link-aggregation port-groups. Each group is comprised of ports
with the same speed.
To d e f i n e L A C P :
STEP 1 Click Bridging > Port Management > LACP. The
LACP Page
opens:
LACP Page
The
LACP Page
contains fields for configuring LACP LAGs.
• LACP System Priority — Indicates the global LACP priority value. The possible
range is 1- 65535. The default value is 1.
• Unit Number — Displays the stacking member for which LACP information is
defined.
• Port — Defines the port number to which timeout and priority values are
assigned.
To Next Page
Loading...
