Cisco SGE2000 - Cisco - Gigabit Switch - Managing Qos Statistics; Viewing Policer Statistics

Viewing Statistics
Managing QoS Statistics
Cisco Small Business SFE/SGE Managed Switches Administration Guide 387
17
• Falling Threshold — Displays the falling counter value that triggers the falling
threshold alarm. The falling threshold is graphically presented on top of the
graph bars. Each monitored variable is designated a color.
• Falling Event — Selects an event which is defined in the Events table that
triggers the falling threshold alarm. The Events Table is displayed in the
RMON
Events Page
.
• Startup Alarm — Displays the trigger that activates the alarm generation.
Rising is defined by crossing the threshold from a low-value threshold to a
higher-value threshold.
- Rising Alarm — The rising counter value that triggers the rising threshold
alarm.
- Falling Alarm — The falling counter value that triggers the falling
threshold alarm.
- Rising and Falling — The rising and falling counter values that trigger the
alarm.
• Interval — Defines the alarm interval time in seconds.
• Owner — Displays the device or user that defined the alarm
STEP 3 Define the relevant fields.
STEP 4 Click Apply. The RMON alarms are modified, and the device is updated.
Managing QoS Statistics
The QoS Statistics section contains the following :
• Viewing Policer Statistics
• Viewing Aggregated Policer Statistics
• Viewing Queues Statistics
Viewing Policer Statistics
The Policer Statistics Page indicates the amount of in-profile and out-of-profile
packets that are received on an interface.