Cisco SGE2000 - Cisco - Gigabit Switch Administration Guide

Configuring Device Security
Defining DHCP Snooping
Cisco Small Business SFE/SGE Managed Switches Administration Guide 132
4
Edit Trusted Interface Page
In addition to the
Trusted Interfaces Page, the Edit Trusted Interface Page contains
the following field:
• Interface — Contains a list of existing interfaces.
• Trust Status — Indicates whether the interface is a Trusted Interface.
- Enable — Interface is in trusted mode.
- Disable — Interface is in untrusted mode.
STEP 4 Define the fields.
STEP 5 Click Apply. The Trusted Interfaces configuration is defined and the device is
updated.
Binding Addresses to the DHCP Snooping Database
The Binding Database Page contains parameters for querying and adding IP
addresses to the DHCP Snooping Database.
To bind addresses to the DHCP Snooping database:

Cisco SGE2000 - Cisco - Gigabit Switch Specifications

General

Form Factor	Rack-mountable
Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
Layer	Layer 2
Power Supply	Internal
Management	Web-based, SNMP, CLI
MAC Address Table Size	8000 entries
VLANs	256
Features	Quality of Service (QoS), IGMP snooping, Port mirroring
Dimensions (W x D x H)	440 x 257 x 44 mm (17.3 x 10.1 x 1.73 in)
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-20 to 70°C (-4 to 158°F)
Relative Humidity	10% to 90% non-condensing
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x